Warning: session_start(): open(/var/lib/php/session/sess_q6f7c492vjvop5bn2mv1185pm0, O_RDWR) failed: Permission denied (13) in /var/www/vhosts/vionics.co.uk/httpdocs/system/library/session.php on line 12 ATMEGA328 WITH ARDUINO OPTIBOOT (UNO)
  • ATMEGA328 WITH ARDUINO OPTIBOOT (UNO)

This is and ATmega328 in DIP package, pre-loaded with the Arduino Optiboot Bootloader (Uno 16MHz). This will allow you to use Arduino code in your custom embedded project without having to use an Arduino board.To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Uno board that has all of these built into the board. IF you are using an FTDI board to upload your code to this chip, you need a 10uF capacitor is series with the reset line. ( -ve to FTDI +ve to RESET on Chip)


Note: This contains the bootloader used on the Arduino Uno.


Write a review

Please login or register to review

ATMEGA328 WITH ARDUINO OPTIBOOT (UNO)

  • Brand: Sparkfun
  • Product Code: PPDEV-10524
  • Availability: 1
  • £4.74

  • Ex Tax: £4.74